 |
|
SOIL TESTS
| Laboratory Tests | |
|
* Atterberg Limits |
* Consolidation Tests |
| * Moisture Content | * Direct Shear |
| * Grain Size Distribution | * Triaxial Tests |
* Specific Gravity of Soil |
* Unconfined Compression |
| * Compaction | * Permeability Tests |
| * California Bearing Ratio | * Hydrometer Analysis |
| * Unit Weight | * Soil Dispersion |
| Field Tests | |
| * Field Density Tests | * Plate Bearing |
| * In - Situ CBR | * Auger boring, Percussion drilling, |
| * Standard Penetration (SPT) | * Wash boring and Diamond drilling |
| * Dynamic Cone Penetration | * Benkelman Beam |
MATERIAL TESTS
| Aggregates | |
|
* Sieve Analysis |
* Specific Gravity |
| * Water Absorption | * Aggregate Impact Value |
| * Los Angeles Abrasion | * Elongation and Flakiness Indices |
|
* Unit Weight |
* Sieve Analysis |
| * Clay Lumps and Friable Particles | * Surface Moisture |
| * Moisture Content | * Light Weight Pieces |
| Cement | |
| * Specific Gravity | * Fineness |
| * Compressive Strength | * Normal Consistency |
| * Setting Time | * Tensile Strength |
| * Soundness | * Loss on Ignition |
| Concrete | |
| * Concrete Mix Design | * Compressive Strength |
| * Determination of Slump | * Air Content |
| * Schmidt Hammer Test | * Core Drilling by Diamond Bit |
| * Tensile Strength | * Consistency |
| Brick | |
| * Compressive Strength | * Water Absorption |
| Bitumen | |
| * Pent ration | * Specific Gravity |
| * Viscosity | * Stripping Value |
| * Ductility | * Softening Point |
| Bituminous Mixes | |
| * Maximum Specific Gravity of Bitiminous Mixes | |
| * Resistance to Plastic Flow of Bituminous Mixes using Marshal Apparatus | |
| * Determination of Degree of Pavement Compaction of Bituminous Aggregate Mixes | |
| * Quantative Extraction of Bitumen from Bituminous Mixes | |
| Concrete Pipes | |
| * 3 Edge Bearing | |
| * Permeability | |
| * Compressive Strengt | |
CHEMICAL TESTS
| Soil | Aggregate |
| * Organic Matter Content | * Soundness using Sodium Sulphate or Magnesium Sulphate |
| * Determination of Sulphate in Soil | * Petrological Analysis |
| * PH - Value | * Mineralogical Analysis |
| * Effect of Organic Impurities | |
| * Organic Impurities in Sand for Concrete |